Rosco Flamex MC Fire Retardant Coating | Film and Video Lighting

Rosco Flamex MC: Versatile Fire Retardant for Set, Scenery, and Prop Construction | Gallon

SKU: 150079MC0128

Availability: Usually leaves warehouse in 2-4 business days

Our Price: $102.88

Price: $105.00 You Save: $2.12 (2%)

Have a Question? Need Expert Advice?

Give Us a Call 888-276-3667

PRODUCT DESCRIPTION

Enhance safety on your film, video, or stage production with Rosco Flamex MC, a premium fire retardant coating designed to treat a wide range of substrates. Available exclusively at Film and Video Lighting – your trusted source for professional lighting and production supplies.

About Rosco Flamex MC

Rosco Flamex MC is a high-performance, 0% VOC fire retardant designed to treat a wide range of substrates used in film, theater, and event production. From raw wood to delicate fabrics, this premixed coating ensures fire safety without compromising material integrity.

Key features:

Non-toxic and environmentally friendly
0% VOC formulation
Ready-to-use, no dilution required
Suitable for props, scenery, and set construction

Materials Treated

Rosco Flamex MC is formulated to treat:

Cotton
Jute, Twine & Burlap
Silks & Other Delicate Fabrics
Polyesters
Nylons
Rayon
Olefins
Open Cell Foam
Wood
Hay & Thatching
Paper
Cardboard

How to Apply Rosco Flamex MC

Rosco Flamex MC is premixed for ease of use. The application method and quantity depend on the material's thickness and density.

Coverage

One gallon covers approximately 400 square feet (37 square meters), varying by material absorbency.

Application Methods

Dipping: Submerge material for 10 minutes, then hang to dry for maximum impregnation.
Brushing: Apply with a wide brush in a crisscross pattern to ensure deep absorption.
Spraying: Use a Hudson-type sprayer with a medium nozzle. Spray from bottom to top in overlapping passes. Account for spray loss when calculating quantity.

Certifications and Compliance

Rosco Flamex MC meets industry-leading fire safety standards:

Approved by the California State Fire Marshall
Approved by the FDNY Fire Marshall
Tested to ASTM E-84 Class A
Tested to NFPA 701

Check the resources tab on our product page for California and New York compliance documents.

Storage and Handling

Store in non-metallic containers. Clean metal sprayers, nozzles, and accessories immediately after use. Avoid metal buckets or paint containers when possible.

Disclaimer

Read instructions carefully before use. Test on a small area to ensure suitability, as material and application conditions vary. Rosco provides no guarantees due to factors beyond their control.