Mobile Navigation

Fall Savings | LEAF500 Save $25 orders $500+  |  LEAF1000 Save $50 orders $1000+

You are shopping Event Lighting & Power

Event Lighting & Power

Event Lighting & Power

Lighting, power and supplies for live events. From corporate meetings and weddings to concerts and festivals, we stock the gear event crews reach for: battery-powered uplights, stage wash fixtures, power distribution and cable, gaffer and spike tape, and rigging hardware. We've supplied production crews since 1995, and real experts answer the phone at 888-276-3667.




Event lighting basics

What you needWhyShop
UplightingColor on walls and décor sets the mood of the room. Battery-powered, wireless fixtures set up fast with no cords to tape down.Astera
Stage washEven light on presenters and performers so they look good in person and on camera.Chauvet Professional, Chauvet DJ, LED fixtures
Power distributionTurns one large feed into breaker-protected circuits, so you're not tripping the venue's wall outlets.Distro boxes, Lex, Quad boxes
Cable and adaptersStingers, feeder cable and adapters to reach every position safely.Stingers, Feeder cable
Tape and maskingGaffer tape for cables, spike tape for marks, black wrap and duvetyne to hide light leaks and clutter.Gaffer tape, Black wrap, Duvetyne
Rigging hardwareClamps and hardware to hang lights from pipe and truss.Clamps and hardware

Event lighting FAQ

How much power does event lighting need?

Add up the watts of every fixture and divide by the voltage to get amps. A circuit running for hours should carry no more than 80% of its breaker rating, about 16 amps on a 20-amp circuit. LED fixtures draw far less than tungsten, which is why most event rigs are LED now. Our Set Power Calculator does the math.

Battery or wired uplights?

Battery uplights set up fastest and look cleanest because there are no cords on the floor. Wired fixtures run all night without charging. Many event companies keep both.

Can I plug event lighting into the venue's wall outlets?

Small LED setups usually can, spread across several circuits. Bigger shows need a dedicated feed and a distro box. Ask the venue what power is available, and have any tie-in done by a qualified electrician.