
Church stage lighting, control and power, from people who light for a living. Barn Door Lighting Outfitters is run by gaffers and grips, and we've supplied lighting and power since 1995. Whether you're adding a few front lights for your livestream or planning a full sanctuary system, we'll help you choose fixtures, control and power your volunteers can run every week. Call 888-276-3667 or ask our Installation and Design team.
| Layer | What it does | Shop |
|---|---|---|
| Front light | Lights faces for the congregation and the camera. The most important layer, especially for livestreaming. | ETC Source Four, LED fixtures |
| Back light | Separates people from the background so they don't look flat on camera. | LED fixtures |
| Stage wash and color | Sets the mood for worship sets. LED wash fixtures mix any color without gels. | Chauvet Professional, Rosco gels |
| Control | A console with saved looks lets volunteers recall the same scenes every week. | ETC consoles |
| Power and dimming | Circuits, dimmers and distribution sized to your fixtures. | ETC dimming, distro boxes, Lex |
Cameras need more front light than the room does, and they need it even. Keep color temperature consistent across your fixtures: mixing warm tungsten (about 3200K) with daylight LEDs or an LED video wall looks wrong on camera. Light faces first, then add back light and color.
It depends on the stage size and how far away you can mount lights. A common starting point is two front lights for each area of the stage, about 45 degrees apart, plus back light. Send us your stage width, depth and mounting height and we'll suggest a layout.
LED fixtures cost more up front but use far less power, run cool and change color without gels. Many churches mix them: LED for wash and color, ellipsoidals like the ETC Source Four for sharp front light and patterns. LED versions of the Source Four are available too.
Yes, if the control is set up for them. Saved looks let a volunteer press one button for walk-in, worship and sermon. We'll help you choose a console your team can learn quickly.
Our Installation and Design team helps with layout, product specs, budgeting and purchasing. Permanent electrical work should always be done by a licensed electrician.