Motion Labs 8 Channel Hand Held Hoist Remote, Yellow, 10ft Tail

PRODUCT DESCRIPTION

8 Channels
Small Frame
Yellow Polyamide
Integrated Handle
10 ft Tail
Cover Included
Direction LEDs
26-Conductor Connection

In short: The Motion Labs 8 Channel Hand Held Chain Hoist Remote Control is the operator interface for Motion Labs chain hoist control systems, connecting through a 26-conductor cable. This small frame version (part number A-16-301-0003) has an injection-molded yellow polyamide body with an integrated handle, a 10 ft tail and a cover. Its aluminum face plate puts a color-coordinated direction LED next to each direction switch, so the operator can see which hoists are set to move and in which direction.

Built for operators

Why choose the Motion Labs 8 channel hoist remote?

When you're flying a rig, the operator needs to see exactly what each hoist is about to do. Motion Labs lays out each direction LED right next to its switch, so the operator can check at a glance which hoists are selected and which way they'll travel before anything moves.

Clear operator layout

A rugged aluminum face plate with color-coordinated direction LEDs laid out next to each direction switch.

High-visibility controls

LED operator controls are easy to read during a show, even from backstage or in low light.

Ergonomic small frame

Injection-molded yellow polyamide with an ergonomic design and integrated handle, comfortable to hold through a long load-in.

10 ft tail and cover

A 10 ft tail gives the operator room to move, and the included cover protects the controls in transit.

Built for touring

Robust polyamide and polyester housings stand up to trucks, cases and daily load-ins.

8 channels

Controls up to eight hoists, a natural match for a single 8 channel Motion Labs controller.

On the deck & in the air

Where is a hand held hoist remote used?

Riggers, hoist operators and rental houses use Motion Labs remotes to run chain hoists from a safe, clear position:

Concert and touring rigs, flying lighting, audio and video truss
Arena and stadium load-ins with banks of hoists on one controller
Corporate and live events flying truss, video walls and scenery
Theatre and venue rigging with Motion Labs hoist controllers
Film and TV stages flying lighting truss or set pieces
Rental house hoist packages paired with 8 channel controllers

Using it well

How do you set up a Motion Labs hoist remote?

Match the channel count. The 8 channel small frame remote suits a single 4 or 8 channel Motion Labs controller. For several controllers, use a 16 or 32 channel large frame remote.
Connect the tail. Plug the remote's 10 ft tail into the controller's remote input. For more reach, add a Motion Labs 26 pin hoist remote extension cable.
Check the LEDs before moving. Set each hoist's direction and confirm the direction LEDs match what you intend before running any hoist.
Keep a clear view. Operate from a position with a clear line of sight to the truss and loads.
Cover it after use. Put the cover on to protect the face plate and switches in the case and on the truck.

Hoist operation should be carried out by qualified riggers following the hoist and controller manufacturers' instructions and your venue's rigging rules.

Full specifications

Motion Labs 8 channel hoist remote specifications

Technical information
Part number	A-16-301-0003
Manufacturer	Motion Labs
Channels	8
Frame	Small
Color	Yellow
Enclosure	Injection-molded polyamide with integrated handle
Face plate	Aluminum, with color-coordinated direction LEDs and direction switches
Tail	1 x 10 ft
Cover	Included
Connection	26-conductor cable to Motion Labs chain hoist control systems

Versions

Which Motion Labs hoist remote do you need?

Motion Labs makes the hand held remote in four versions. Small frame remotes suit a single controller. Large frame remotes connect to several 4, 6 or 8 channel controllers to run up to 32 hoists at once.

Motion Labs hand held chain hoist remotes, yellow
Part number	Channels	Frame	Tail	Cover
A-16-301-0001	4	Small	1 x 10 ft	Included
A-16-301-0003	8	Small	1 x 10 ft	Included
A-16-302-0002	16	Large	2 x 5 ft	Not listed
A-16-302-0004	32	Large	4 x 5 ft	Not listed

Questions

Motion Labs hoist remote frequently asked questions

What is the Motion Labs 8 Channel Hand Held Chain Hoist Remote?

It is the operator interface for Motion Labs chain hoist control systems, connecting through a 26-conductor cable. This small frame version, part number A-16-301-0003, controls up to eight hoists and has a yellow polyamide body with an integrated handle, a 10 ft tail, a cover and an aluminum face plate with direction LEDs.

Which controllers does the 8 channel remote work with?

It works with Motion Labs chain hoist control systems that connect through a 26-conductor cable. The 8 channel small frame remote suits a single 4 or 8 channel controller. Match the channel count to your controller setup.

How do I get more reach from the remote?

The small frame remote has a 10 ft tail. For more reach, Motion Labs makes 26 pin hoist remote extension cables in 25, 50, 75 and 100 ft lengths. Check that the connector matches your system.

What do the direction LEDs show?

Each color-coordinated direction LED sits next to its direction switch, so the operator can see at a glance which hoists are set to move and in which direction before running them.

What is the difference between the small frame and large frame remotes?

Small frame remotes come in 4 and 8 channel versions for a single controller, with a 10 ft tail and a cover. Large frame remotes come in 16 and 32 channel versions and connect to several 4, 6 or 8 channel controllers to run up to 32 hoists, with two or four 5 ft tails.

Can one remote run more than 8 hoists?

Not this one. The 8 channel remote controls up to eight hoists. To run up to 16 or 32 hoists across several controllers, choose the 16 or 32 channel large frame remote.

Does the remote come with a cover?

Yes. The small frame 4 and 8 channel remotes include a cover to protect the face plate and switches.

Rigging and power advice from people who actually do it

Barn Door Lighting Outfitters has supplied film lighting, grip and power distribution since 1995. We're still a small, family-owned shop in Beaufort, South Carolina. Not sure which remote, controller or cables fit your hoist system? Call 888-276-3667 or email info@barndoorlighting.com and a real person will help you spec it.