Availability: Backorder, Usually leaves warehouse in 8-12 business days
The Slim Dimmer is an 1800 Watt, 120VAC electronic dimmer with NEMA 5-15 (Edison) connectors. It is a compact, rugged, unfiltered dimmer with onboard fader control and digital intensity display.
Catalog Number: LDT1.8K
Motion Picture and Television Production, Retail Displays
Provides compact portable dimming for balancing or matching lights anywhere simple dimming is required, such as television or motion picture use.
Agency Approvals: UL and cUL Listed - Approved for use in the U.S. and Canada
***Local Control Only
The dimmer's digital display will illuminate when powered. Slide the dimmer's built-in fader to provide the desired lighting level. The digital display will indicate a percentage (0-100%), permitting the dimmer to be easily and repeatedly set to a specific level. It also permits multiple independent LDT dimmers to be easily set to the same level. The dimmer is protected by an on-board 15 Amp, push-to-reset circuit breaker. During normal operation the breaker button will be flush with the surface of the unit. When the breaker is tripped, the button will pop up above the surface of the unit. If the on-board circuit breaker trips, verify load size and the integrity of the cables being used, then push the circuit breaker's "button" in to reset. If the breaker continues to trip, a serious fault exists with either the load cabling or the load itself. The fault must be rectified before the dimmer can be used.
The Lex Products Slim Dimmer 1.8kW is a compact dimmer with no output filtering. Depending on the lamp and fixture being dimmed, there may be some lamp noise (lamp sing) generated when the lamp is dimmed. For noise sensitive dimming applications use the full featured Lex Products 1.8kW Portable Single Dimmer.