Rosco Double Stick Floor Tape Roll
For installing floors in semi permanent situations.SEMI - PERMANENT INSTALLATION:
This installation method is appropriate for all Rosco
Floors except Roscoleum and Studio Tiles.
the floor using double stick tape the procedure is slightly different. It is best when installing your floor
in this fashion to have two people working together to adjust the floor and tape. First, determine the front edge
of the first piece of floor to be taped. Once you have decided where the front edge of your floor is going to fall,
attach the double stick tape to the subfloor making sure to leave the plastic covering on the side of the tape
that will come in contact with your floor. Then position the first piece of floor over the tape making sure the
front edge of the floor is covering the entire width of the tape. Working in 3 foot sections, fold back the
corresponding edge of floor, remove the plastic covering on the tape then press the floor onto the tape.Complete
the entire length of the floor in this fashion. Continue with all the remaining pieces of floor.
This product may contain a chemical known by the State of California to cause health issues. Details found here www.P65Warnings.ca.gov