ETC Smart Module 2 Dimmer 4 Channel Pack with Edison Out

***Photo shown is with Stage Pin Outlets***

ETC Smart Module 2 Dimmer 4 Channel Pack with Edison Out

SmartModule 2: 4 x 10A (1200W) SmartModule 2, cable in, Edison out. No connector on the bare end input cable.

Anywhere dimming, anytime. Available with either four or six dimmers, SmartModule 2 brings compact and affordable dimming solutions to any venue that requires maximum flexibility. Whether mounting SmartModule 2 on a wall, hanging on a pipe or setting up on the floor, museums, schools, rentals, small touring shows and convention centers can have professional-quality dimming with a small price tag.

No complicated setup. No console required. Just plug in and go. SmartModule 2 performs reliably and is designed to last.

SmartModule 2 offers presets, local control capabilities and a choice of dimmer curves, as well as 20 pre-programmed chases for unattended operation. And it’s convection cooled – SmartModule 2 operates without fans or filters.

Pair with a SmartBar® 2 for next-generation dimming that is reliable, portable and affordable.

Product Features:

• 4x10A dimmers
• Single-phase 20A 2-wire plus ground feed
• Three-phase, 20A four-wire plus ground feed
• Choice of output connectors: Stage Pin, Edison, Twist-Lok
• Load protection per dimmer –1200W circuit breakers (10A)
• Stand-alone operation for local control and chase sequences
• Programmable functions such as non-dim operation and dimmer curves
• Convection cooled for silent operation
• UL / cUL Listed
• Installation requires attachment of a safety cable, data via DMX, and main power input using your choice of a panel mount connector or a flexible cable

ELECTRICAL:

• Input power feed - 20A max per phase
• 85-140VAC phase to neutral 47-63Hz
• Four Circuit - choice of power entry -- Single 12/3 SO cable for 120V hot/neutral/ground feed -- Single 12/4 SO cable for 120/240V single (bi/2) phase feeds
• Cable input models- Power via an attached flexible 12’ SO cable with bare-ends (connector not supplied)
• 2500V isolation between control and power components
• Dual SCR forward phase dimming
• Total load can not exceed capacity of main power connection (wall outlet, 15A, 20A per phase)
• 75W minimum load per dimmer
• Dual Edison, Stage Pin or Twist-Lock outlets (1 per circuit)
• Single duplex auxiliary outlet
• 10A magnetic supplemental circuit breaker for each output

CONTROL FEATURES:

• DMX512 In and Thru via 5 Pin XLR connectors
• Supports up to 32 SmartModule 2 units on one DMX line
• High contrast 2-line by 20-character backlit LCD with graphic channel level indication
• Six-button Smart style keypad
• Two status indicators: Power and Valid DMX
• Soft patch any dimmer to any DMX channel
• Five selectable dimmer output curves: IES modified, square law, Linear, Switched (50% threshold), Fluorescent with adjustable cut-off, Adjustable Pre-Heat
• Local manual control and 20 built-in chase patterns for stand alone operation
• Multi-Language capability - English, Spanish, German, and French

Size: 8"H x 6W x 13"L

Weight: 16 lbs